12V 60A DC Battery Charger Controller

Specification B2B Operation ：mobile operation from dynamo and starter battery (Battery to Battery): it refers to charging the main battery through dynamo and starter battery, .If it is not used in the Vehicle , you can also use one battery (12V) to charge another 1. .The efficient charging converter (booster) allows full charging of the board battery during 2. . It increases/reduces the voltage to the level, which is required for precise charging of the board battery with the optimum characteristic line of 3. .The simultaneously supplied 12 V consumers are protected against overvoltage and voltage Further Characteristics of the Unit * Theoutput voltage is stabilized, free of peaks, smoothed and * Galvanic isolation between input andoutput: * Noovervoltage at the output and thus protection of the consumer if the ground line is * Clean,undisturbed mass ratios, even with long supply * Stableoperating voltage on site in mobile operation, g. Containers, trailers, roll containers etc. * Filteringand suppression of disturbances on the input to the output * Fullyautomatic continuous operation: The DC-DC converter can constantly work with the battery * Surveillance-free operation: multiple protection against overload, overheating, overvoltage, shortcircuit, Misconduct and deep discharge of the battery through electronic regulation to complete Switch off by built-in safety switch.